Features

The accurate design of double digital display make voltage and current clear
Utilize multi-communication socke

AT RF standard signal source(0.15-2000M)
General Description:
AT801 Type Dual-tone Frequency Synthesizer applies large-scale integrated circuit and is small and light, so it is portable. It is applicable to field working of microwave communication lines and use as signal source of dual-tone measurement for production.

• Frequency range: 700-1200MHz,set withBCD code switch, each step 0.1MHz,It is continuously adjustable.
• Dual-tone spacing:0.1-99.9MHz,each step0.1MHz. It is continuously adjustable.
• Composition of dual-tone mutual adjustment:≤dBc(output level 0dBm,dual-tone spacing 1MHz)
• Frequency stability:2?0-6
• Output level:0dBm,with output adjustable within +3~15dB
• Output attenuation range:0-80Db,adjustable by 1dB per second
• Phase noise: ≤-90dB/Hz/10KHz
• Harmonic suppression: ≥25dB,Clutter suppression ≥60dB
• Output impedance: coaxial L16 type 50Ω

• Features:

  • Frequency output range: 935-960MHz
  • With signal amplitude standard adjust
  • With analog IQ signal

Features

Frequency range:015-1050MHz.(common oscillograph is within 20MHz or 1000MHz.)AT5011 is equipped with racking signal generator.

Can measure amplitude and frequency of signal simultaneously, and test and compare multiple-channel signals and analyze the component of signal. 4.5-digital display(central and marker frequency, resolution 0.1MHz).

Amplitude range: -100~+13dBm,that is signal within 2.24µv~1v can be tested. (The sensitivity of frequency meter shall exceed 20mV, 10000 times smaller than the spectrum analyzer). Fregnency resolution 20kHz?400kHz and video filter.

AT Spectrum Analyzer Series

5010 spectrum analyzer(0.15~1050MHz)
5011spectrum analyzer(0.15~1050MHz)with tracking generator.
5005 spectrum analyzer (0.15~500MHz)
5006 spectrum analyzer(0.15~500MHz)with tracking generator
5006 spectrum analyzer(0.15~1050MHz) specializing in maintaining mobile

Application

AT spectrum analyzer can carry out good examination to the faults of cable system and wireless system including remote control, cordless phone, cable TV and communi cation equipment, as well as comparison and analysis to frequency of signals.

AT 5010 spectrum analyzer can test mobile phone logic, RF circuit and signal, for example, control signal of logic circuit, base band signal; local oscillator signal of RF circuit, IF signal and transmission signal. It is very quick and accurate to use AT5010 spectrum analyzer to overhaul the fault of mobile phone with can not to enter the network, and determine the fault point. Electromagnetic Compatible(EMC)Testing: measure the function of harmful

electromagnetic wave to be transmitted by various electronic equitment. In addition, it can output AM/FM demodulation signal from PHONE socket, identify the broad cast signal by noise. From the angle of authorialzation, it is very effective measurement function for the evaluation and research in advance to carry out the measurement of radioactive noise. Widely used in production, development, schooling and scientific research.

AT Spectrum Analyzer Series

Range: 0.15~1050MHz(-3dB)
Display accuracy of central frequency: ¡À100kHz
Marker accuracy: ¡À0.1% of frequency span+100kHz
Resolution of frequency display: 100kHz(4.5LED)
Span width: 100Khz/div~100MHz/ div
1-2-5 steps and zero span
Span accuracy: ¡À10%
Frequency stability: <150kHz/hr
IF bandwidth(-3dB): 400kHz and 20kHz
Video filter: 4kHz Sweep frequency: 43Hz

AT5000-F1(frequency expander)
Expansion frequency range(1050~2050MHz)

AT5000-F2(frequency expander)
Expansion frequency range(2050~3050MHz)

AT5000-F3(frequency expander)
Expansion frequency range(3050~4050MHz)